Custom Pages

Showing posts with label inkscape. Show all posts
Showing posts with label inkscape. Show all posts

Sunday, April 2, 2017

Drawing Symmetrical Chains

Today's post will be about how to draw a symmetrical arc, which can be used to represent chains in tatting diagrams. This is something that has come up in the online Inkscape discussions, and a few members were trying to find solutions to the problem. I found something that works pretty well, and I will share it below.

To begin, open Inkscape and select the Pencil tool. You will need to draw either a horizontal or a vertical line. (Due to limitations in the software, this method will NOT work with diagonal lines. However, after you have made your symmetrical arc, you can always rotate it into the correct position later on).

To draw a horizontal line, use the Pencil tool to click a point on the screen, then hold the CTRL key and click on another point to the right of your original location. The CTRL key will help keep the line in a horizontal position (or a vertical position, if you are drawing a vertical line).


Next, we need to switch to the Node tool (F2) to add a central node to the line. With the node tool, click on your line, and then click on the icon at the top of the screen to "Insert new nodes into selected segments":


This will place a new node in the middle of your line:


Make sure the central node is still selected before proceeding to the next step (the node will be blue when selected). Now, click on the icon at the top of the screen to "Make selected nodes symmetric":


This will change the appearance of the node from a diamond to a square. You should also notice a few small circular icons on either side of the node. These are called node handles:


If you do not see the node handles, please make sure that "Show Bezier handles of selected nodes" is turned on. This icon appears at the top of the screen when the node tool is selected. It looks like this:


To turn the line into an arc, we are going to select and drag the central node while holding the CTRL key on the keyboard. Make sure that the central node is the only node selected for this part (otherwise you will be moving the entire line):


Now it's time to edit the fullness of the arc. For this step, you will be clicking and dragging a node handle while holding CTRL on the keyboard. Remember that the node handles are the small circular icons on either side of the node.

You only have to choose one node handle to drag. The other node handle will automatically adjust along with it (this is what is meant by a "symmetrical node").

In the example below, I've dragged the right node handle to make the arc more full:


This is what the completed symmetrical arc looks like:


I can see this method being useful for creating bookmark or cross diagrams. If you can find a vertically or horizontally positioned chain within a doily diagram, this method can also be used there. Subsequent chains can be copy/pasted from the first chain and rotated and placed as needed.

Here is an example of a simple edging diagram containing symmetrical chains:


Only the first ring, chain, and picot set were drawn. I then grouped the first set, duplicated it, and moved each repeat into position using the arrow keys.

If you have questions about anything contained in this post, feel free to leave them in the comments section below.

Saturday, April 1, 2017

Drawing Teardrop Shaped Rings: Alternative Method

On Wednesdays, a few members of the Online Tatting Class have been meeting to discuss using Inkscape to create tatting diagrams. I've been attending the early sessions, which are at 3 PM Eastern Standard Time.

During the first class, one of the members named Pixie shared an alternative method of creating teardrop shaped rings. I had previously used a different method, which can be found by clicking here.

This alternative method involves drawing an oval with the Circle tool, changing the oval into a Path, and then making the topmost node corner (which creates a pointed end). I've incorporated another step, which is to add a Spiro path effect to the ring, to smoothen out the curves.

Here is a step by step tutorial.

After opening Inkscape, you will need to draw an oval using the circle tool:


This oval needs to be changed to a Path, so that we can get editable nodes. To change it to a Path, select the oval and go to Path -> Object to Path on the main menu:


Once the oval has been changed into a Path, it should have four little square icons (called "nodes") around the perimeter. These will be visible only after the node tool (F2) is selected.

Select the Node tool, which is right underneath the cursor icon on the left side of the screen. Then, click on the topmost node of your oval, or whichever node you would like to make pointy (it will turn blue after it has been selected). Next, click on the icon at the top of the screen to "Make selected nodes corner". You will need to click on this icon twice to get a nice sharp point:


This is what the oval looks like afterwards. You can see the teardrop shape beginning to form:


We can smooth out the edges of the ring by adding a Path effect called "Spiro Spline". To do this, select your ring and go to Path -> Path effects on the main menu.


This will open up a new window on the right side of the screen. Click on the "+" icon to add a new effect:


After clicking the "+" icon, a pop up window will appear in the middle of the screen. Scroll down and select "Spiro spline" then click "Add":


This will smooth out the edges of the ring to make a nice teardrop shape:


If you want to reshape the ring, you can do so by using the resize arrows, which appear when the ring is selected with the Cursor tool (F1). The height and width can be adjusted pretty freely, and you don't have to worry about holding the CTRL key while resizing. Click here to read more about resizing shapes in Inkscape.

You can also adjust the shape of the ring by moving nodes with the node tool, but I don't think it's necessary in this case. However, if you would like to see a more detailed explanation of that please leave a comment down below and I will create a separate post with pictures.

After you have a shape that you like, remember to save it to a template file for future use. Copy/pasting images from a template file saves a lot of time when creating new diagrams.

In my next post I'll talk about how to draw symmetrical chains. The question popped up in our online Inkscape discussion a few weeks ago, and I've finally found a solution. I just need to take screenshots and compile a post.

Tuesday, December 15, 2015

11b) Drawing "Automatic" Pattern Repeats (Part 2)

In the previous post, I talked about how to move an object's center of rotation to create "automatic" pattern repeats. I used very basic examples (a ring and a trefoil) and did not build up the diagram any further. In order to build up the diagram, we need to use a feature in Inkscape called guides. If you are unfamiliar with guides, click here to read more. 

The reason we will be using guides is so that we can match up the center of rotation of the rings, chains, and picots in our diagram. We will be using the intersection of a horizontal and a vertical guide as a "snapping point" for all of our rotation centers. This will ensure that each element rotates around the same central axis.

Before I begin, be sure to familiarize yourself with the hotkeys on the right side of the screen (these will appear after you have dragged at least one guide onto the screen). The topmost button is responsible for turning guide snapping on and off:



A bit further down is a button to "snap other points":


Just below "snap other points" is another button with crosshairs, which enables an object's center of rotation to be snapped to guides:


For the purpose of this tutorial, you will need to enable the above features (the buttons will be a darker shade of gray when selected). As you work on building your diagram, keep in mind that it is also okay to turn guide snapping off when you don't need it. It can sometimes get in the way when trying to place parts of a drawing. I regularly toggle between turning snapping on and off by pressing the first button mentioned above.

Monday, December 14, 2015

11a) Drawing "Automatic" Pattern Repeats (Part 1)

It's been a while since I've written a tutorial about Inkscape, and I think it's time to talk about my favorite trick with the software. This is a method I use to automatically place pattern repeats in a diagram. It can be used for any diagram that has symmetry: from a butterfly all the way up to a doily. Even if you already know how to use Inkscape, I encourage you to read on to see if this is something that would be useful to you.

Here is an example of a finished diagram (the Frauberger Doily) using this method. All rings, chains, and picots have been duplicated and rotated around a central axis. Only the first pattern repeat is placed by hand. All others are generated by the computer:


It's a little difficult to explain the entire process in one post, so I am breaking this tutorial into two posts. For the first post, I will talk about how to move the center of rotation and how to calculate the degree of rotation.

Monday, April 13, 2015

10) Using Layers and Drawing on Photos

Today I will be talking about using Layers in Inkscape. For tatting diagrams, we won't be doing anything too complex with layers (assuming you are working with two dimensional tatting). I imagine that layering would get very complex if you want to diagram a three dimensional pattern. I do not have experience in this area, but I have provided a very basic example of diagramming layered rings at the bottom of this post.

I like to use layers for two reasons:
1) To keep my numbers and diagram separate, so that I don't inadvertently pick up my diagram when trying to move numbers, and
2) To place a photo of my finished tatting on the bottom layer, so that I have something to draw on top of

Everything you need can be found on the Layers menu at the top of the screen:


Of particular importance:
1) Add Layer: Use this any time you want to add a new layer to your project
2) Lock/Unlock Current Layer: Also available on the toolbar and layers side menu. Locking a layer will prevent parts of your diagram from moving when you are not working on them.
3) Move Selection to...: Use this any time you want to move items from one layer to another. Select the item that you want to move before clicking on this menu function.
4) Raise Layer/Lower Layer/Layer to Top/Layer to Bottom: Topmost layers will overlap items on bottom layers. Use this part of the menu to re-organize your layers as necessary.
5) Layers...: Use this to open up a side menu for layers.

Note that almost all of these functions can be accessed by opening up the layers side menu. Go to Layer-->Layers... on the main menu to open the side menu:



The eyeball icon toggles between making the layer visible and invisible (I never use this). The lock icon toggles between locking and unlocking your layer (I use this all the time). Hover your mouse over the other icons to see what they do.


Separating Numbers and Diagram

Before I knew about layers, I had some very frustrating experiences with trying to move numbers around, only to pick up pieces of my diagram instead. You can avoid this frustration by placing your numbers on a separate layer from your diagram. You will also need to lock your diagram in place to prevent it from moving.

First, draw your diagram. When you are finished, click on the lock icon at the bottom of the screen to lock this layer into place:


Now, on the main menu, go to Layer-->Add Layer


Title this whatever you want. I've called mine "Numbers"


I'm keeping the position "Above current" because I'd rather have my numbers overlap my diagram than the other way around. On my "Numbers" layer, I can add numbers and move them around freely, without worrying about picking up the diagram below:


I can use the icons at the bottom of the screen to lock and unlock layers, as well as switching between them:



Drawing on top of a Photo

I first encountered this idea at InTatters. I believe it was Jane Eborall who mentioned that she drew on top of photos to make diagramming easier.

To draw on top of a photo, you first need to have a photo or scan of your finished tatting saved to your computer. Try to use a photo that is from a bird's eye view, as flat as possible.

To open up this photo in Inkscape, go to File-->Import on the main menu:


Find your file on the computer and click "Open". You will then get a pop up window with the following boxes checked. Press "OK" to continue:


Your photo will probably be huge, so you will need to resize it. To resize, hold the CTRL button on your keyboard as you move the rectangular box inward to make the image smaller. (Click here to read more about resizing)

Your photo should be on a layer of its own, placed below all other layers. You will probably want to change the opacity so that your photo is slightly transparent. This will enable you to see more clearly as you draw your diagram, instead of having the photo obstruct your view.

Opacity can be changed on the Layers side menu, or on the Fill and Stroke menu under "Stroke Style". (Tip: Use the Layers side menu if you want to change the opacity of everything on that layer. Use the Fill and Stroke menu if you only want to change the opacity of a few items on the layer).

Below is a screenshot of opacity on the Layers side menu. I've turned mine down to 75%.


When you are finished importing your photo and turning down the opacity, remember to lock this layer into place. This will prevent you from moving the photo as you are drawing your diagram.

Now, add a new layer on top of the photo layer. This will be you diagram layer.


Begin drawing your diagram as usual. Here are a couple of screenshots of in process drawing (I use Guides to keep everything straight):



After you are finished drawing your diagram, you can unlock the photo layer and delete the photo. You can also remove the photo layer entirely if you'd like.


Basic Layered Patterns

I haven't designed any layered tatting patterns, but I know there are quite a few out there. To diagram such a pattern involves creativity. You might combine various methods from this tutorial series, along with methods of your own to achieve the desired result.

Here is a very basic example involving layered rings. I won't provide too much detail, but hopefully it's enough to act as a jumping off point for your own explorations.

On the top layer, I have created a simple six ring flower. On the bottom layer, I have created a larger six ring flower, which has been rotated by 30 degrees.


Each ring in the bottom layer has been cut into two pieces, using the method from a previous post (Click Here). This enabled me to use dashed lines with 75% opacity on the inner segments, and solid lines with 100% opacity on the outer segments. (Opacity was set on the Fill and Stroke menu).

When I place the top layer on the bottom layer, I get this:


I actually worked these two layers on top of each other as seen directly above. (They were only separated after everything was finished, to show you what each component looks like). I used the Lock Layer function to prevent the bottom layer from moving as I worked on the top layer, and vice versa.

The finished diagram is meant to represent a six ring flower with another six rings layered on top. Since I've never actually tatted layered rings, I don't have a photo to go along with it. Yet, I hope it will provide ideas for those of you attempting to diagram such patterns.

Thursday, April 9, 2015

9) Black and White Split Rings

In my previous posts, I talked about how to draw split rings in two colors. Here are a few options if you are working with a black and white diagram. This is not an exhaustive list, so feel free to use this as a jumping off point to play around with Inkscape and come up with methods of your own. You can also use these techniques on split rings with color, as shown at the bottom of the post.

Drawing Lines

If you are working with a black and white diagram, you may simply wish to include a line to symbolize the split. This line can be drawn with the Pencil tool or with the Bezier tool. If you use the Bezier tool, remember to press Enter on your keyboard (or double click on your mouse) when you are finished drawing your line.

Guides come in handy when trying to draw straight lines. (Though if you prefer to hold the CTRL key down while drawing, that works too!) Click here to read more about using Guides.

In the example below, I've placed a vertical guide on top of my ring. I used the pencil tool to draw a line directly on top of my guide, allowing it to snap into place.


To create a ring with an uneven split, you might use a combination of vertical and horizontal guides:


If you want to be sure that your guides are aligned with the center of your ring, click on the icon to "Snap centers of objects" found on the right side of the screen.

 
You can also double click on your guide to change the angle of rotation. Below, I've changed the angle of one of my guides to 60 degrees:

 
If you prefer curved lines, use the Bezier tool to create an arc (in the same way we did on Post #2 Another Way to Draw Chains)


Once you have finished, you can remove your guides by dragging them off of the screen, or by hovering over them and pressing delete on your keyboard. Also, don't forget to press CTRL+G to group your ring and line together when you are done.


Dashed Lines

If you don't want to use a solid line in the middle of the split ring, you can experiment with Dashes. These can be found on the Fill and Stroke menu, under the tab called "Stroke Style"


Make sure you have your line selected first. Then click on the drop down menu for Dashes and choose from a variety of styles. Please note that you will have to access the Dashes menu again when you want to go back to drawing solid lines. Here are some examples of rings with dashes:


Again, these need to be grouped so that everything moves together.


Arrowheads

As I was looking at a post on Ninetta's blog, I noticed that she used arrows to designate directions on her split rings. Clever!

Arrowheads are called "Markers" in Inkscape, and can be found just underneath dashes on the Fill and Stroke menu, on the tab for Stroke Style:


Just as we did with Dashes, we will be drawing a line first, then adding the marker to the selected line. Arrowheads work best on straight lines. They don't rotate correctly when moving around curves.

There are three drop down menus for Markers. You can choose between Start, Mid, and End Markers. (For Mid Markers to work you must have a middle node). Make sure that you have updated to the current version of Inkscape, where they have fixed an issue with arrowheads not conforming to fill and stroke colors.

Here are a few rings with arrows.



Fill

If you split your ring into two equal parts (click here for the tutorial), you can set the Fill to a light gray color as I have done below. (Set Fill through the Fill and Stroke menu, or by clicking on a color from the palette at the bottom of the screen). I added a dashed line to one of my examples, but this is optional.


This method only works if you have a ring split down the middle. It doesn't fill properly with an uneven split ring:


To fill uneven splits, you should use the Paint Bucket tool.


Paint Bucket Fill

Any areas that are bound by solid lines can be filled with the Paint Bucket tool. This will not work if you are separating your split ring with dashed lines.

To use this tool, click on the Paint Bucket icon on the left side of your screen. Now choose a color from the palette on the bottom of the screen, and click on an area of your ring that you would like to fill. (Paint bucket fills have a Stroke color, which can appear as an unwanted outline. If you see that outline, go in and change the Stroke to the same color as your Fill.)

Sometimes, the paint bucket tool can be a little overzealous and fill your entire shape before you are ready. If this happens just press CTRL+Z on your keyboard to Undo.


A note about using the paint bucket tool: the closer you are zoomed in, the more accurate the fill. For some reason, this tool does not fill correctly when zoomed out. (Click Here to go to an external site that talks more about this limitation and how to fix it)

Here are a few uneven splits filled with the paint bucket tool:


When you are done, remember to CTRL+G to group all of the elements of the ring together. Otherwise, Inkscape will treat the paint bucket fill as a separate part, and move it independently of the rest of the ring.


Rings with Color

If you are working with color, you can still use the above techniques to dress up your split rings.

Here are a few examples: