Custom Pages

Showing posts with label stiffening. Show all posts
Showing posts with label stiffening. Show all posts

Tuesday, November 20, 2018

Glittery Snowflakes and Etsy Sale

When the new Liz Metallic threads came out, I was excited to try them and potentially use them for snowflakes. I had high hopes for the Iridescent color, but found it difficult to work with and not as sparkly as I thought it would be. I ended up making a few snowflakes in Liz Metallic Silver but still longed for a white snowflake with sparkle.

I started brainstorming: Maybe I could mix Mod Podge with glitter and use it to stiffen a white snowflake? I wanted to do a bit of research online to see if anyone had done this before, and found that Mod Podge actually has a product with glitter already mixed in! It's called Mod Podge Extreme Glitter. I was able to find some at my local Michael's craft store:


I placed my snowflake on plastic wrap and used a foam brush to paint both sides with Mod Podge. I then blotted out the excess stiffener with a paper towel and laid the snowflake on a fresh sheet of plastic wrap to dry for 24 hours. I'm really pleased with the results! The snowflake is stiff (great for ornaments) and very sparkly. It's hard to capture in photos and seems to show up better on camera in low light:


More glitter shows up when the camera is out of focus:


If you have access to this product, I highly recommend trying it out. Maybe start with something small to make sure you like the results before using it on something that took a while to tat. The Mod Podge does add some thickness to the tatting, so be sure to blot pretty thoroughly after applying it.

This snowflake is one that I designed fairly recently. I started out with a small onion ring snowflake and extended the arms for a larger version. I took inspiration from Joëlle Paulson's Snowdrop pattern to extend the arms.


I named the above pattern Shimmer Snowflake, since it's my first project to use the glittery fabric stiffener. You can find the pattern in my Etsy shop by clicking HERE. I'm also having a holiday sale which will end on Tuesday, November 27. Everything in the shop is 20% off, no code needed. I noticed some other Etsy shops are having holiday sales as well so head on over to see if you can find any good deals :)

Monday, March 20, 2017

Stiffening beaded tatting

This is a continuation of my previous post, in which I tested out different methods of stiffening tatting. I received a comment asking if anyone had tried fully submerging a piece of beaded tatting into a stiffener, and how that would turn out. Luckily, I had a few tatting scraps to test this on: one with beads and one with a metal filigree finding.


I decided to use Mod Podge Stiffy because it is my favorite of the fabric stiffeners that I tried. I poured the stiffener into a plastic cup and submerged the tatting in it for a few minutes. Afterwards, I took the tatting out and blotted it really well with a paper towel. I made sure to remove any excess stiffener that had gotten onto the finding and beads. I let the tatting dry overnight on a paper plate wrapped in plastic wrap.

Here are the results. The heart had a lot more substance to it, so it turned out a little stiffer than the small beaded sample.


I didn't notice any stiffener stuck to the metal filigree finding. Even though the tatting was blotted really well, it still maintained the same level of stiffness as my previous tatted samples using Mod Podge Stiffy. I guess the stiffener really soaked into the fibers.

Here's another picture of the back of the filigree finding. I think the color abnormalities are just part of the finding, and not the fabric stiffener:


I tested the stiffener on a small beaded sample as well. If anything, maybe the beads became a little duller after the process? It's hard to tell as I forgot to take a picture of the tatting before it was stiffened.


Again, there is no residue left on the beads and the tatting is fairly stiff. This one didn't have as much substance so it's not quite as stiff as the tatted heart.

Overall, I'd say this product works really well and as long as you are careful to blot out the excess stiffener, it shouldn't interfere with beaded tatting. However, I would suggest running a test before using it on something you like, just to be sure!

Wednesday, March 15, 2017

Testing out Fabric Stiffeners

I managed to find a few different products to test out as stiffeners. That giant pile of tatting in the front contains my scraps from designs gone wrong...I guess that's what happens when you create patterns for a few years. All of those scraps definitely came in handy for this experiment though!


When testing out the stiffeners, I tried to choose light and dark colors, as well as one larger piece of tatting. The stiffening mixtures were prepared in plastic cups or bowls, and I let the tatting soak for a few minutes before removing it and blotting with a paper towel. I then set the tatting to dry overnight on a paper plate that had been covered in plastic wrap.

All in all, the stiffeners were much more similar to each other than I had expected. I really thought that some of these would turn out badly, but they all ended up being viable methods for stiffening tatting.

The first one I tried was Elmer's glue mixed with water. Instructions online say to mix about half glue and half water.

Update: I received a message informing me that there is also a product called Elmer's Glue-All, which is different than the school glue. I might go back and run another test with Glue-All to see how well it works for stiffening.


On my first attempt, I put way too much water in the mixture and not enough glue. The stiffened tatting really wasn't stiff at all. It was almost as if I had blocked it with plain water. So, I tried again, making sure to put much less water and much more glue. It helped a lot, but the glue + water mixture is still the least stiff of all of the options that I tried. Here's a photo of the stiffened tatting:



I didn't notice any whitening of the tatting, even when using this on black thread. Maybe a little duller than untreated tatting, but you'd have to really stare at it to notice.

The next stiffener I tried was Mod Podge mixed with water. I chose the "matte" finish because I didn't think that glossy would work well. I didn't find any recommendations for Mod Podge, but I'm familiar with using it to seal finished puzzles and I really like the product.


The Mod Podge was much easier to mix with water than the Elmer's glue. However, like the Elmer's glue, I underestimated the amount of Mod Podge and had to go back for a second trial to increase the proportion. The resulting tatting turned out fairly stiff, and the color remained mostly unchanged. There is a very slight dulling of the black thread that is really difficult to see.


Overall, this turned out pretty well, and I might even be able to use Mod Podge by itself, without mixing any water in (though I haven't tested this yet).

The third stiffener I tried was Mod Podge Stiffy, a fabric stiffener. This ended up being my favorite of the group.


The mixture is already made for you, so you don't have to add water. However, you can add water if you'd like to dilute it. This stuff really works and the tatting was very stiff after drying. Perfect for a tatted box.


The one mistake I made with the fabric stiffener is that I didn't blot it out enough afterwards. It started to pool a little bit and left residue on the finished tatting. I tried it a second time and made sure to blot the tatting really well. This worked for me, and I didn't see any residue after it dried. The black thread is a tiny bit dull, but again, it's hard to see unless you compare it with untreated black thread and look very closely.

The last stiffener I tried was corn starch mixed with water. I followed a recipe found on this website (click here).


With this recipe, the tatting didn't turn out as stiff as I would have liked, but it would still work well on snowflakes and other tatting. (I just want mine really stiff because I'm making a box).

I tried making a new corn starch mixture with a lot less water, but it ended up turning into a gelatin. I still used the gelatin to stiffen the tatting, and it was near impossible to blot out. It also dulled the color, as you can see in this photo.


This was initially the same shade of pink, which turned much lighter with corn starch (left) and retained its original color with Mod Podge Stiffy (right).

I think I'll save these tatted samples in ziplock bags so I can get an idea of how the stiffeners hold up over time. I'm wondering if any of them will start to yellow or make the colors of the thread fade.

For my tatted box, I've decided to use Mod Podge Stiffy, and I've already bought a styrofoam block to use as a form. I just have to cut the block to make it the right size and then find the time to stiffen the tatting, probably this weekend. After that, maybe I can start designing a lid?

Update: Click here to read a post about stiffening beaded tatting